Mipa P16 Polyester putty offers high-quality, 2-component putty application on various surfaces.
Mipa P16 Polyester putty is a high-quality, 2-component putty that offers excellent adhesion to iron, steel, aluminum, galvanized steel surfaces, and glass and carbon fiber surfaces. P16 is a particularly good choice for treating wooden surfaces as well.
P16 putty is flexible to apply and very easy to sand. Its light composition means that 1 liter of P16 putty is equivalent to about 1.8 kg of standard plastic packages.
When using this product, the included hardener is mixed in a 2% weight ratio. The color tone of the kit is neutral beige.
Additional information:
- Drying time 20°C 20-25min - 60°C 5-10min
- Usage time after adding hardener: 4-5 min at 20°C
- Lowest operating temperature: 10°C
- Hardener is included in the price
Tips for a better result:
First, sand the surfaces to be plastered with one of these P.80, P.120 or P.180 papers. Wipe the surface to be glazed with silicone detergent . Apply several thin layers of putty, preferably rather than one thick one. When the putty is dry, sand the surface of the putty smooth, preferably by hand using a sanding pad, with sandpaper P. 240 and P. 320.
If you putty aluminum or zinc surfaces, you can increase the adhesion by spraying Mipa EPX epoxy primer before the putty.
Your basket is empty.
