Northern Lights Metal flake is a new addition to our own product brand! This high-quality, finely divided metal flake gives your vehicle a look that stands out from the crowd. Mix the desired amount of sandpaper with clear varnish and spray on the surface. When varnishing and painting with color paste, the mixing ratios of the product and drying times must be followed in the normal way.
- Packaging: 25 grams, packed in a bag
Tip for a better result:
After adding the hardener and/or thinner, add the desired amount to the clear coat. For spraying, use an upper canister paint sprayer with at least a 1.4 mm liquid nozzle. Spray several thin layers of the lacquer on top of the color paste, so that the end result is pleasant. Between layers, it is good to check that the surface is not too full and starts to run. Runoff completely ruins the end result. When there is a desired amount of flake on the surface, wash the sprayer and varnish the surfaces of your vehicle with a varnish that does not have flake. This varnishing is carried out completely normally according to the product instructions. If you want a completely flat surface, the varnished surface must be water-sanded and varnished once without chipping according to the normal instructions. NOTE! WATER SANDING ONLY WHEN THE LACQUER LAYER IS COMPLETELY DRY, PREFERABLE AFTER 2-3 WEEKS IF THE PAINTING CONDITIONS ARE AROUND +20 DEGREE!
Your basket is empty.
